

Blue Sky 3500W LED Display Instant Water Heater - SL-X5-35A
Blue Sky
Description
Product Specifications
Product Name – Blue Sky SL-X5-35A 3500W LED Display Instant Water Heater
Brand – Blue Sky
Model Number – SL-X5-35A
Type – Water Heater
Power – 3500W
Power Supply – 220V~, 50/60Hz
Heating Element – Cast aluminium
Controls – Rotary knob, LED display, 3 status indicators
Temperature Range – 30–55°C
Overheat Cut-out – 60°C
Activation Flow – 1 L/min
Water Connections – G1/2
Ingress Rating – IPX4
Cable Length – 80cm
Circuit Breaker – 20A minimum
Wiring – 2.5mm² minimum
Meter Rating – 32A minimum
Mounting – Wall-mounted, vertical
Colour – White
Key Features
3500W Instant Heating: Water heats as it passes through, so there is no tank to fill and no waiting. The heater starts on its own once flow reaches 1 litre a minute.
LED Display and Status Lamps: A lit two-digit readout set into the front panel, with three icons under it for water flow, power and fault — so a problem shows itself instead of being guessed at.
Cast Aluminium Heating Element: The 3500W element is cast aluminium, the same construction used across the SL-X5 series.
30–55°C Across the Dial: The full range runs from a mild 30°C up to 55°C, set on the unit itself rather than at the tap.
60°C Overheat Cut-out: A thermal cut-out interrupts heating at 60°C, so the element cannot keep firing into water that is already too hot.
IPX4 Splash Rating: Rated IPX4 against splashing water from any direction — the rating a unit needs to live on a bathroom wall.
Shower Set in the Box: Ships with the handset, hose, inlet filter, flow valve and the hanging plate and screws, so nothing else has to be bought to mount it.
80cm Cable, G1/2 Fittings: Standard G1/2 water connections and an 80cm lead. Wire it on a 20A breaker with 2.5mm² cable, off a meter rated 32A or better.
Product Description
The SL-X5-35A adds a lit display to the Blue Sky instant range. A two-digit LED readout sits in a textured panel down the front of the unit, with three status icons beneath it — water flow, power and fault — and the temperature is set on the knob below, anywhere from 30 to 55°C.
Underneath it is the same 3500W cast aluminium element as the rest of the SL-X5 series. Water is heated on the way through, so there is no tank and nothing to reheat between showers; the unit fires once flow reaches 1 litre a minute and cuts out thermally at 60°C.
It hangs on the bathroom wall on the supplied plate with G1/2 connections, and the shower handset, hose, inlet filter and flow valve are in the box. Wire it on a 20A breaker with 2.5mm² cable from a meter rated 32A or better.
What's in the box
- Water heater unit
- Shower handset and hose
- Inlet filter
- Water flow valve
- 2 × electricity guard device
- Hanging plate and screws
Description
Product Specifications
Product Name – Blue Sky SL-X5-35A 3500W LED Display Instant Water Heater
Brand – Blue Sky
Model Number – SL-X5-35A
Type – Water Heater
Power – 3500W
Power Supply – 220V~, 50/60Hz
Heating Element – Cast aluminium
Controls – Rotary knob, LED display, 3 status indicators
Temperature Range – 30–55°C
Overheat Cut-out – 60°C
Activation Flow – 1 L/min
Water Connections – G1/2
Ingress Rating – IPX4
Cable Length – 80cm
Circuit Breaker – 20A minimum
Wiring – 2.5mm² minimum
Meter Rating – 32A minimum
Mounting – Wall-mounted, vertical
Colour – White
Key Features
3500W Instant Heating: Water heats as it passes through, so there is no tank to fill and no waiting. The heater starts on its own once flow reaches 1 litre a minute.
LED Display and Status Lamps: A lit two-digit readout set into the front panel, with three icons under it for water flow, power and fault — so a problem shows itself instead of being guessed at.
Cast Aluminium Heating Element: The 3500W element is cast aluminium, the same construction used across the SL-X5 series.
30–55°C Across the Dial: The full range runs from a mild 30°C up to 55°C, set on the unit itself rather than at the tap.
60°C Overheat Cut-out: A thermal cut-out interrupts heating at 60°C, so the element cannot keep firing into water that is already too hot.
IPX4 Splash Rating: Rated IPX4 against splashing water from any direction — the rating a unit needs to live on a bathroom wall.
Shower Set in the Box: Ships with the handset, hose, inlet filter, flow valve and the hanging plate and screws, so nothing else has to be bought to mount it.
80cm Cable, G1/2 Fittings: Standard G1/2 water connections and an 80cm lead. Wire it on a 20A breaker with 2.5mm² cable, off a meter rated 32A or better.
Product Description
The SL-X5-35A adds a lit display to the Blue Sky instant range. A two-digit LED readout sits in a textured panel down the front of the unit, with three status icons beneath it — water flow, power and fault — and the temperature is set on the knob below, anywhere from 30 to 55°C.
Underneath it is the same 3500W cast aluminium element as the rest of the SL-X5 series. Water is heated on the way through, so there is no tank and nothing to reheat between showers; the unit fires once flow reaches 1 litre a minute and cuts out thermally at 60°C.
It hangs on the bathroom wall on the supplied plate with G1/2 connections, and the shower handset, hose, inlet filter and flow valve are in the box. Wire it on a 20A breaker with 2.5mm² cable from a meter rated 32A or better.
What's in the box
- Water heater unit
- Shower handset and hose
- Inlet filter
- Water flow valve
- 2 × electricity guard device
- Hanging plate and screws
Reviews
Sign in to leave a review



